Industrial warehouse roofs, factory sandwich-panel halls, agricultural estates and residential villas increasingly require precision mechanical solar mounting structures from Türkiye: EN AW-6063 T6 anodized aluminum roof rails, non-penetrating standing-seam & EPDM-sealed trapezoidal clamps, Magnelis® / ZM310–ZM430 or EN ISO 1461 hot-dip galvanized ground-mount cold-formed steel tables, and structural steel solar carport canopies—strictly focused on structural/mechanical framing without electrical cables or inverters.
Reviewed for technical terminology, Turkish factory field reality and published EUR scope boundaries (not statutory engineering sign-off).
length × width × frame height mm), portrait vs landscape orientation (e.g. 2P×14 or 4L×7 table) and tilt angle.kN/m²), seismic zone and soil/corrosivity category (C3 / C4 / C5) provided by your project structural engineer.6060/6063-T6 anodized aluminum rails (15–20 µm), S350GD + ZM310/ZM430 zinc-aluminum-magnesium roll-formed posts/purlins or EN ISO 1461 hot-dip galvanized steel.A2-70 / A4-80 stainless mid/end clamps, T-bolts, EPDM roof isolation pads (preventing steel-to-aluminum galvanic corrosion!).<= 5.8 m for 20ft or <= 11.8 m for 40ft containers) and bundled kit labelling by roof zone or array row.
Installing generic roof hooks or unsealed self-drilling screws onto an industrial PIR/mineral-wool sandwich-panel roof voids roof watertightness and creates thermal bridges or galvanic rust between aluminum rails and coated steel sheets.
Because our team coordinates both Turkish sandwich-panel roofs and mechanical solar mounting manufacturers, we ensure roof rib geometry, EPDM sealing gaskets, stainless A2-70 fasteners and rail spans are matched cleanly.
Our Quotation Comparison (€290) normalises €/kWp or €/table mechanical quotes by net aluminum/steel tonnage, alloy/coating certificates and included stainless hardware, followed by Pre-shipment Checks (€490) verifying profile thicknesses, anodising/zinc micron readings and bolt-kit counts.
| Code | Scoped Service / Package | Fee (EUR) | Standard scope & main limits | Action |
|---|---|---|---|---|
SS-SOURCE |
Supplier Shortlist | €690 | 1 product family / up to 10 line items; up to 5 candidates researched; target up to 3 suitable candidates; 1 RFQ round; no minimum matching supplier guarantee | Select |
SS-COMPARE |
Quotation Comparison | €290 | Up to 3 quotations; up to 10 comparable line items; 1 clarification round; technical/commercial comparison; no supplier search | Select |
SS-TECH |
Technical Factory Review | €790 | 1 building-product family; 1 site; up to 6 hours on site; up to 10 drawings / 50 document pages; scope-linked technical observations; no certification or engineering approval | Select |
SS-PRE |
Pre-shipment Check | €490 | 1 site / 1 order; up to 4 hours on site; up to 5 SKUs within agreed sampling checklist; no full-lot or accredited test guarantee | Select |
Source PIR, PUR and mineral-wool roof & wall sandwich panels, trapezoidal sheets, standing-seam roofs and flashings for warehouses, hangars, villas and prefab buildings.
Source pre-engineered steel warehouses, industrial factory halls, logistics buildings and aircraft/agricultural hangars—plus purlins, sandwich panels and hangar doors.
Source galvanized Z/C/Sigma purlins, hollow structural tubes, cold-formed sections, brackets and custom steel assemblies for houses, warehouses and hangars.
Source architectural aluminum extrusions, curtain walls, composite panel substructures, bioclimatic villa pergolas, louvers and glass railings in Türkiye.
No. SerSourcing focuses strictly on architectural and structural construction hardware—extruded aluminum roof rails/clamps, cold-formed HDG / Magnelis® ground-mount steel tables and structural steel solar carport canopies. Electrical components are excluded.
Yes—and doing so is best practice. Matching trapezoidal mini-rails or standing-seam clamps directly to the exact Turkish sandwich-panel crown width and sheet thickness prevents roof leaks on site.
Yes. Leading Turkish solar-structure roll-formers process high-strength S350GD–S420GD coils with ZM310–ZM430 zinc-magnesium coatings as well as batch hot-dip galvanized (EN ISO 1461) rammed C/sigma piles.
Yes. Turkish steel fabricators produce bolted hot-dip galvanized or duplex-painted cantilever and T-frame solar carports complete with trapezoidal deck sheets and purlins ready for container or trailer export.
Your project’s licensed structural engineer retains final statutory approval; we collect manufacturer static calculation sheets, mill test reports (EN 10204 3.1) and physical clamp/profile samples to support that sign-off.